🔄 How to Safely Reset Your Circuit Breaker

A Quick Guide for Homeowners and Electricians

⚡ Step-by-Step Reset Instructions

Locate the Breaker Panel: Usually found in basements, utility rooms, or near the main entrance.
Identify the Tripped Breaker: Look for a switch that’s in the middle position or slightly off from the rest.
Turn Off Devices: Before resetting, switch off or unplug appliances connected to the affected circuit to prevent overload.
Reset the Breaker: Push the tripped breaker fully to the OFF position, then firmly back to ON. You should feel a slight resistance and click.

🚫 Common Mistakes to Avoid

Flipping too quickly: Not fully turning the breaker OFF before switching it ON can prevent a proper reset.
Ignoring repeated trips: If the same breaker keeps tripping, don’t just reset—investigate the cause.
Overloading circuits: Plugging in too many devices after a reset can trigger another trip.

🧤 Safety First

Before touching the panel, make sure your hands are dry and you're standing on a dry surface.

Use insulated gloves
Handle tools with rubber grips
Never reset breakers in wet conditions or with exposed wiring

🧠 Know When to Call a Pro

If you notice burning smells, visible damage, or breakers that won’t stay on, it’s time to call a licensed electrician. Homeowners should only reset breakers when the cause is clear and safe—like a temporary overload. Anything beyond that deserves expert attention.

Welcome! We are dedicated to providing you with the support you need.

Add a subtitle here.

Visit Us Today

We look forward to assisting you with your engineering needs